Siemens Albatros2 Technical Manual page 47

Adapt temperature
temporarily
Adjust comfort setpoint
Siemens
Building Technologies
Settings:
Temporarily 'warmer' or 'cooler' allows the user to temporarily adjust the
l
temperature for special situations.
A temporary adjustment is made when selecting 'warmer' or 'cooler';
l
afterwards, the controller returns to the presettings.
Setting '...' disables or switches off the function.
l
Proceed as follows to adjust the temperature for a living zone to your needs:
w The desired living zone is selected.
1. Turn the control knob until the temporary setting is preselected.
2. Press the control knob.
The temporary setting is selected and is displayed inverted.
3. Turn the control knob to the right to temporarily operate the living zone at a
warmer temperature.
4. Turn the control knob to the left to temporarily operate the living zone at a
cooler temperature.
5. Press the control knob to confirm the setting.
Proceed as follows to adjust the comfort setpoint:
w The desired living zone is selected.
1. Turn the control knob until the comfort setpoint setting is preselected.
2. Press the control knob.
The comfort setpoint setting is selected and is displayed inverted.
3. Turn the control knob and set the desired comfort temperature.
4. Press the control knob to confirm the setting.
Graphical User Interface UI400
Plant operation, quick access
Operating heating/cooling
5
47
CE1U2348en
2014-06-03