Regional Settings - Siemens Albatros2 Technical Manual

6.2.1
Prerequisites
Siemens
Building Technologies

Regional settings

Adjustable:
1. Time
2. Date
3. Daylight saving time start and end
4. Language
The aforementioned settings, are a component of the commissioning wizard with
the exception of start and end of daylight saving time.
The service/setting pages ( ) are preselected in the navigation bar.
l
Proceed as follows to change regional settings:
1. Turn the control knob and select the Regional settings.
2. Press the control knob.
'Regional settings' opens. The title of the regional settings page is preselected.
3. Turn the control knob to go to an adjustable value.
4. Press the control knob to access the setting.
5. Turn the control knob and enter the value.
6. Press the control knob to confirm the settings.
The value is once again preselected.
7. Go to the title for additional regional settings or exit regional settings with
"Back".
Graphical User Interface UI400
Evaluate plant and set
Operating service/setting pages
6
65
CE1U2348en
2014-06-03