Prerequisites
Change living zone
Siemens
Building Technologies
Enter settings
The temperature page ( ) is selected on the navigation bar.
l
Selectable zones.
The living zone cannot be selected or edited, if the room or operator unit is
assigned to only one living zone or jointly operates all assigned living zones.
Proceed as follows to change living zone:
1. Turn the control knob and select the living zone.
2. Press the control knob.
The living zone setting is selected and is displayed inverted.
3. Turn the control knob to select another living zone.
4. Press the control knob to confirm the selected living zone.
a Information and settings for the selected living zone is now displayed below the
dash.
Graphical User Interface UI400
Plant operation, quick access
Operating heating/cooling
5
45
CE1U2348en
2014-06-03