Energy Consumption - Siemens Albatros2 Technical Manual

6.1.3
Prerequisites
Siemens
Building Technologies
Energy consumption pages
Evaluate energy consumption
The energy pages displayed depend on available plant energy producers (oil,
l
natural gas, heat pump, solar, solid fuel, etc.).
Energy consumption is displayed on a time axis.
l
The display range can be set: 8 days, 12 months, or 10 years.
l
Go to energy consumption pages and set views
The Info pages ( ) are selected in the navigation bar.
l
Proceed as follows to go to energy consumption pages and set views:
1. Press the control knob to preselect the title of an Info page.
2. Press the control knob.
The title of the Info page is selected and is displayed inverted.
3. Turn the control knob to the right until the first energy consumption page is
displayed.
a The title of the energy consumption page consists of the energy producer
and evaluated time frame.
a The consumption diagram bar is displayed in the work area.
4. Turn the control knob to go to other energy producers.
5. Press the control knob to preselect the title of the energy producer.
6. Turn the control knob to go to the time frame in the title.
7. Press the control knob to select the time frame.
8. Turn the control knob to change to 8 days, 12 months, or 10 years.
9. Exit Info pages with the back arrow.
Graphical User Interface UI400
Evaluate plant and set
Evaluate and operate Info pages
6
63
CE1U2348en
2014-06-03