Commission Plant Using The Commissioning Wizard - Siemens Albatros2 Technical Manual

7 Commission plant using the commissioning
Structure
Repeat chapter and skip
Siemens
Building Technologies
wizard
NOTICE
Startup response of the commissioning wizards.
● Depending on the controller, operating line 39 (OEM) of the room/operator
unit-specific section or the entire commissioning wizard can be suppressed at
initial power-up (initial commissioning).
● Depending on the controller, a query is displayed on the operator unit at the
end of the commissioning dialogs on whether to switch off Automatic start of
the commissioning wizards at the next power-up.
● The commissioning wizard can be queried at any time (see Section "Start
commissioning wizards [➙ 80]"). Operating line 39 and the auto start setting is
then ignored.
The commissioning wizard is structured in a room/operator unit-specific part (in the
graphic white) and a plant-specific part (in the graphic gray).
Notes on room/operator unit settings available in Section "Room/operator unit
l
parameters [➙ 86]".
Notes on plant settings are available in user's guide for your controller.
l
The entire room/operating-specific part as well as chapter or sub-chapter of the
l
plant-specific part can be repeated (in graphic: Redo).
The chapter or sub-chapter of the plant-specific part can be skipped (in
l
graphic: Skip).
Graphical User Interface UI400

Commission plant using the commissioning wizard

7
71
CE1U2348en
2014-06-03