Siemens Albatros2 Technical Manual page 51

Prerequisites
Change living zone
Set operating mode
Siemens
Building Technologies
Enter settings
Select ventilation page (
l
Selectable zones.
The living zone cannot be selected or edited, if the room or operator unit is
assigned to only one living zone or jointly operates all assigned living zones.
To change living zones, proceed in the manner as described for the temperature
page.
Settings:
Off: Ventilation is switched off.
l
Automatic: The living zone is controlled as per the time switch program.
l
Stage 1 to Stage 3: Ventilation is continuously operated at the set stage.
l
The operating mode can be individually set per living zone.
Use plant/zone switch on start page.
It is easier to use the plant/zone switch on the start page if you want to operate
the entire building in automatic mode.
To change operating mode, proceed in the manner as described for the
temperature page.
Graphical User Interface UI400
Plant operation, quick access
) on the navigation bar.
5
Operate ventilation
51
CE1U2348en
2014-06-03