Table of Contents
Advertisement
Watch all warning and indicator
6
lights on the display.
ABS self-diagnosis rou-
88
tine not completed
ABS is not available because
the self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
z
system can check operation of
the wheel sensors: min 3 mph
(min 5 km/h))
If an ABS error is displayed after
the ABS self-diagnosis is com-
pleted:
It remains possible to continue
riding. Please be aware that
neither the ABS nor the inte-
gral function are available.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
ASC/DTC self-
diagnosis
The self-diagnosis routine
is determining whether
BMW Motorrad ASC/DTC
is ready for operation. The
self-diagnosis routine runs
automatically when you switch on
the ignition.
Phase 1
Check on system components
monitored by the diagnostic
system while vehicle is parked.
flashes slowly.
Phase 2
Checking the diagnosable sys-
tem components while the mo-
torcycle is moving.
flashes slowly.
ASC/DTC self-diagnosis
completed
ASC/DTC warning light goes
out.
Watch all warning and indicator
lights on the display.
ASC/DTC self-diagnosis
routine not completed
ASC/DTC is not available, as
the self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation of
the wheel speed sensors: min
3 mph (min 5 km/h))
If an ASC/DTC error is displayed
after the ASC/DTC self-diagnosis
is completed:
It remains possible to continue
riding. It must be noted that
the ASC/DTC function is not
available.
Advertisement
Table of Contents
