Abs Error - BMW R 1200R 2015 Rider's Manual

ABS self-diagnosis not
3
completed
flashes.
38
Possible cause:
ABS self-diagnosis rou-
tine not completed
ABS is not available because
the self-diagnosis routine was
z
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation of
the wheel sensors: min 3 mph
(min 5 km/h))
Ride off slowly. It must be
noted that the ABS function
is not available until the self-
diagnosis has been completed.

ABS error

lights up.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is not available.
It remains possible to continue
riding. Observe additional in-
formation on special situations
which can lead to ABS fault
codes ( 99).
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad retailer.
ABS switched off
lights up.
Possible cause:
The ABS system has been deac-
tivated by the rider.
Switch on ABS function.
ASC/DTC intervention
flashes rapidly.
ASC/DTC has detected in-
stability at the rear wheel and re-
sponded by reducing the torque.
The warning light flashes longer
than the ASC/DTC intervention
lasts. This feature continues to
furnish the rider with visual feed-
back confirming that the system
has initiated active closed-loop
intervention even after the critical
situation has passed.
ASC/DTC self-diagnosis
not completed
flashes slowly.