Connecting Cables (P80) - Precor UBK 800 Assembling And Maintaining Manual

Installing the Console

Connecting Cables (P80)

After the console has been seated, separate the individual
cables out of the end of the cable assembly and attach them
to the appropriate circuit connectors inside the console. Refer
to the following diagram and table to identify the cables and
connectors.
Figure 11: Cable connections, P80 console
Table 1. P80 internal cable connections
Cable
Ethernet (LAN)
TV in
Power
Data from base unit
Connector Type
Eight-contact modular, on
round black cable
F-type coaxial
Two-contact plug,
polarized and latched
Eight-contact modular, on
flat gray cable
25
Circuit
Connector
Location