Installing The Bottle Holder - Precor UBK 800 Assembling And Maintaining Manual

Assembling the Exercise Bike

Installing the Bottle Holder

The bottle holder attaches to a plastic support that has been
mounted on the upright support at the factory.
To install the bottle holder:
1.
2. Secure the bottle holder onto its support using the two #8
Position the bottle holder on its support so that the three
tabs on the bottle holder fit into the three rectangular
holes in the support.
x ⁵₈-inch self-tapping screws, as shown in the following
illustration.
Figure 7: Installing the bottle holder
19