Unpacking The Equipment - Precor UBK 800 Assembling And Maintaining Manual

14

Unpacking the Equipment

The shipping container for Precision Series exercise bikes
consists of the following items:



To unpack the bike:
1.
2. Lift the cover upward and set it aside.
3. Carefully remove any staples holding the cardboard
4. Pull the cardboard spacers away from the equipment and
5. Cut all plastic ties securing the equipment in place.
6. Remove the upright support from the container and set it
7. With the help of at least one other person, lift the body
8. With the help of at least one other person, carefully tilt
Assembling and Maintaining UBK 800-Series Upright Exercise Bikes
Wooden pallet
Cardboard base
Cardboard cover
WARNING
Carefully remove all staples securing the cover to the
cardboard base.
spacers in place at the ends of the container.
set them aside.
down near the spot where you plan to install the
equipment.
assembly and move it forward until its front legs can be
lowered to the floor.
the body assembly forward until it rests on the wheels
attached to the front legs. Roll it to the location where you
plan to install it, then tilt it back until it rests flat on the
floor.
Do not attempt to move the equipment off of
the pallet by yourself. Have at least one other
person help you, and use safe lifting
techniques.