Show Uidb Index - Cisco ASR 9000 Series Command Reference Manual

Troubleshooting Commands

show uidb index

To display micro-interface descriptor block (IDB) index information, use the show uidb index command in
EXEC mode.
show uidb index
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the show uidb indexcommand to display the micro-IDB index assigned by the software.
Task ID
Task ID
cisco-support
Examples The following example shows the output of the show uidb index command:
RP/0/RSP0/CPU0:router# show uidb index
------------------------------------------------------------------------------
Location Interface-name
---------------------------------------------------------------------------
0/1/CPU0 0
0/1/CPU0 GigabitEthernet0_1_5_0
1
0/1/CPU0 GigabitEthernet0_1_5_1
2
0/1/CPU0 GigabitEthernet0_1_5_2
3
0/1/CPU0 GigabitEthernet0_1_5_3
4
0/1/CPU0 GigabitEthernet0_1_5_4
5
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
Modification
This command was introduced.
Operations
read
Interface-Type Ingress-index
Main interface
Main interface
Main interface
Main interface
Main interface
show uidb index
Egress-index
0 0
1
2
3
4
5
39