Cisco ASR 9000 Series Command Reference Manual page 63

Tech-Support Commands
Command Default
The command output is not compressed.
Command Modes
EXEC
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support aps command to run show commands that display APS debugging information.
This command generates information that can be useful for Cisco Technical Support representatives when
troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page
iii in the Preface for Cisco Technical Support contact information.
Note This command is not required during normal use of the router.
Task ID
Task ID
basic-services
Examples The following example shows a truncated output of the show tech-support aps command:
RP/0/RSP0/CPU0:router# show tech-support aps show-only terminal
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
---------------------------------- show aps -----------------------------------
no aps group found
show tech-support aps
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
Modification
This command was introduced.
Operations
read
show tech-support aps
57