Show Tech-Support Performance-Traffic - Cisco ASR 9000 Series Command Reference Manual

Tech-Support Commands

show tech-support performance-traffic

To automatically run show commands that display information specific to video monitoring, use the show
tech-support performance-traffic command in EXEC mode.
show tech-support performance-traffic file send-to [background| compressed| uncompressed] [location
{node-id| rack rack-id}]
Syntax Description
performance-traffic
file
send-to
background
compressed
uncompressed
Specifies that the keyword to collect video monitoring support information.
This is mandatory.
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• compactflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• flash: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• slot0: filename
• slot1: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
show tech-support performance-traffic
191