Cisco ASR 9000 Series Command Reference Manual page 293

Watchdog Commands
Examples
The following sample output is from the show critmon deadline command:
RP/0/RSP0/CPU0:router# show critmon deadline registration location all
------------------------------------------------------------------------------
Deadline monitoring registration info (Node: 0/5/CPU0)
------------------------------------------------------------------------------
ID ClientName
-- ------------------------
0
------------------------------------------------------------------------------
Deadline monitoring registration info (Node: 0/4/CPU0)
------------------------------------------------------------------------------
ID ClientName
-- ------------------------
0
------------------------------------------------------------------------------
Deadline monitoring registration info (Node: 0/2/CPU0)
------------------------------------------------------------------------------
ID ClientName
-- ------------------------
0
------------------------------------------------------------------------------
Deadline monitoring registration info (Node: 0/1/CPU0)
------------------------------------------------------------------------------
ID ClientName
-- ------------------------
0
This table describes the significant fields shown in the display.
Table 13: show critmon deadline Field Descriptions
Field
Deadline monitoring registration info
ID
ClientName
Activated
tick address
timeout vale(sec)
wdsysmon
wdsysmon
wdsysmon
wdsysmon
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
Activated tick address
--------- ------------
Yes 0x6023d000
Activated tick address
--------- ------------
Yes 0x38146000
Activated tick address
--------- ------------
Yes 0x38146000
Activated tick address
--------- ------------
Yes 0x38101000
Description
Deadline monitoring registration information that is
used for the node.
Client ID that is internally managed by the
wd-critical-mon process.
Name of the client.
Field specifies that deadline monitoring is activated
or not.
Tick memory address for the client application.
Deadline timeout value.
show critmon deadline
timeout vale(sec)
----------------
60
timeout vale(sec)
----------------
60
timeout vale(sec)
----------------
60
timeout vale(sec)
----------------
60
287