Renault ALASKAN 2017 Driver's Handbook Manual page 80

Left Hand Drive (LHD) model
Switches for the trip computer (where fitted) are
located on the instrument panel on either the left or
right side of the steering column
trip computer, push the switches as shown above.
j
Each time the or switch B is pushed, the dis-
play will change as follows:
Car view (Home) → Average speed → Elapsed time
and trip odometer → Current and average fuel con-
sumption → Navigation (where fitted) → Compass
(where fitted) → Audio (where fitted) → Driving aids
(where fitted) → Warning check → Settings → Car
view (Home)
j
When the <ENTER> switch B is pushed and held
for more than 3 seconds, the average speed, the
elapsed time, the trip odometer, the current and
average fuel consumption can be reset.
1. Car view [Home]
The Car view [Home] screen can be selected when
the driver does not want see any information on the
trip computer screen.
2-22
Instruments and controls
2. [Speed] and [Average]
NIC3093
The (digital) speed
. To operate the
which the vehicle is travelling.
The average speed
speed since the last reset. Shortly press the
<ENTER> switch to switch between trip 1 and 2.
Pressing the <ENTER> switch for longer than 1
second enters the Reset menu.
The display is updated every 30 seconds. The first
30 seconds after a reset, the display shows [——].
NIC2755
j
A shows the current speed at
j
B shows the average vehicle
3. [Trip]
j
Trip [Distance] A :
The trip odometer mode shows the total distance
the vehicle has been driven since the last reset.
Shortly press the <ENTER> switch to switch be-
tween trip 1 and 2. Pressing the <ENTER> switch
for longer than 1 second enters the Reset menu.
(The elapsed time is also reset at the same time.)
j
Elapsed [Time] B :
The elapsed time mode shows the time since the
last reset. Shortly press the <ENTER> switch to
switch between trip 1 and 2. Pressing the <ENTER>
switch for longer than 1 second enters the Reset
menu. (The trip odometer is also reset at the same
time.)
NIC2756