Starting And Driving; Running-In Schedule; Before Starting Engine - Renault ALASKAN 2017 Driver's Handbook Manual

RUNNING-IN SCHEDULE

During the first 1,600 km (1,000 miles), follow these
recommendations to obtain maximum engine per-
formance and ensure the future reliability and
economy of your new vehicle. Failure to follow these
recommendations may result in shortened engine
life and reduced engine performance.
•
Do not drive at a constant speed, either fast or
slow, for long periods of time.
•
Do not run the engine over 4,000 rpm.
•
Do not accelerate at full throttle in any gear.
•
Do not start quickly.
•
Do not brake hard as much as possible.
•
Do not tow a trailer for at least the first 800 km
(500 miles).
5-2

Starting and driving

BEFORE STARTING ENGINE

WARNING
The driving characteristics of your vehicle will
change remarkably by any additional load and its
distribution, as well as by adding optional equip-
ment (trailer coupling, roof rail, etc.). Your driv-
ing style and speed must be adjusted according
to the circumstances. Especially when carrying
heavy loads, your speed must be reduced ad-
equately.
•
Make sure the area around the vehicle is clear.
•
Check fluid levels such as engine oil, coolant,
brake (and clutch) fluid, window washer fluid as
frequently as possible, at least whenever you
refuel.
•
Visually inspect tyres for their appearance and
condition. Measure and check the tyre pressure
for proper inflation.
•
Check that all windows and lights are clean.
•
Adjust the seat and head restraint positions.
•
Adjust the inside and outside rearview mirror po-
sitions.
•
Fasten your seat belt and ask all passengers to
do the same.
•
Check that all doors are closed.
•
Check the operation of the warning lights when
the ignition switch is placed in the "ON" position.
•
Maintenance items in the "8. Maintenance and
do-it-yourself" section should be checked peri-
odically.