Renault ALASKAN 2017 Driver's Handbook Manual page 194

Receiving a call
When receiving an incoming call, the display will
show the caller's phone number (or a notification
message that the caller's phone number cannot be
shown) and three operation icons.
1. Answering and during a call:
Answer the call by pressing <ENTER> (the
highlighted).
By pressing <ENTER>, you can select the following
options:
•
Ending the call by selecting
<ENTER>.
•
Put the call on hold by selecting
<ENTER>.
•
[ ]
Use this item (the transfer handset command) to
transfer the call from the audio system to your
mobile phone.
To transfer the call back to hands-free via the
audio system select [ ].
4-62
Display screen, heater and air conditioner, and audio system
•
[#123]
Use this item to enter numbers during a call. For
example, if directed by an automated phone sys-
tem to dial an extension number the system will
send the tone associated with the selected num-
ber.
2. Put a call on hold:
Rotate the <MENU> dial until
press <ENTER>. The call is on hold. Pressing
<ENTER> accepts the call, rotate the <MENU> dial
clockwise and press <ENTER> to reject.
3. Rejecting a call:
Rotate the <MENU> dial until
press <ENTER>. The call is rejected.
is
and press
Initiating a call
and press
A call can be initiated using one of the following
methods:
– Making a call from the phone book
– Manually dialling a phone number
– Redialling
– Using call history (Call List menu)
•
Dialled
•
Received
•
Missed
Making a call from the phone book:
Once the Bluetooth
between the registered mobile phone and the audio
system, phone book data will be transferred auto-
matically to the audio system. The transfer may take
a while before completion.
is highlighted,
NOTE
Phone book data will be erased when:
•
Switching to another registered mobile
phone.
•
is highlighted,
Mobile phone is disconnected.
•
The registered mobile phone is deleted from
the audio system.
1. Press < >.
2. Turn the <MENU> dial and scroll down to [Phone
Book] then press <ENTER>.
3. Scroll down through the list, select the appropri-
ate contact name (highlighted), and press
<ENTER>.
4. A following screen will show the number to be
dialled. If correct, press <ENTER> again to dial
the number.
If the contact has more numbers assigned for
(home),
and select the appropriate number to dial.
®
connection has been made,
(mobile), or (office), scroll,