HOW TO ADJUST THE SCREEN
Adjusting screen (for models with
navigation system)
1. Push the <SETUP> button.
2. Select the [System] key.
3. Select the [Camera Settings] key.
4. Select the item you wish to adjust.
•
[Display Mode]:
Adjusts to fit the level of lighting in the vehicle.
Touch the [Display Mode] key to cycle through
options of the mode ([Day], [Night] and [Auto]).
•
[Brightness]:
Adjusts the brightness of the display.
•
[Contrast]:
Adjusts the level of contrast.
•
[Colour]:
Adjusts the level of the colour.
When [Brightness], [Contrast], or [Colour] are se-
lected the system will change to the camera view to
modify the settings using the <ENTER>/Scroll dial.
4-10
Display screen, heater and air conditioner, and audio system
Adjusting screen (for models without
navigation system)
1. Push the <ENTER/SETTING> button
2. Turn the <TUNE·FOLDER> dial
the [Brightness] or the [Contrast] key.
3. Push the <ENTER/SETTING> button
4. Adjust the level using the <TUNE·FOLDER> dial
and then push the <ENTER/SETTING> but-
ton
to apply the adjustment.
NOTE
Do not adjust the Brightness or Contrast of the
reversing camera while the vehicle is moving.
OPERATING TIPS
•
When the shift lever is shifted to the R (Reverse)
position, the monitor screen automatically
changes to the reversing camera mode. How-
ever, the radio can be heard.
•
It may take some time until the reversing camera
or the normal screen is displayed after the shift
lever has been shifted to R (Reverse) from an-
other position or to another position from R (Re-
verse). Objects may be distorted momentarily
until the reversing camera screen is displayed
completely.
•
When the temperature is extremely high or low,
the screen may not clearly display objects. This
is not a malfunction.
•
When strong light directly enters the camera,
objects may not be displayed clearly. This is not
JVH0653XZ
a malfunction.
•
Vertical lines may be seen in objects on the
.
screen. This is due to strong reflected light from
to highlight
the bumper. This is not a malfunction.
•
The screen may flicker under fluorescent light.
.
This is not a malfunction.
•
The colours of objects displayed by the revers-
ing camera may differ somewhat from those of
the actual object.
•
Objects on the monitor may not be clear in a
dark place or at night. This is not a malfunction.
•
If dirt, rain or snow attaches to the camera, the
reversing camera may not clearly display objects.
Clean the camera.