Child Restraint Installation Using Isofix - Renault ALASKAN 2017 Driver's Handbook Manual

CHILD RESTRAINT INSTALLATION
USING ISOFIX
WARNING
•
Attach ISOFIX and i-Size child restraints only
at the specified locations. For the ISOFIX
lower anchor locations, see "ISOFIX lower an-
chor point locations" earlier in this section. If
a child restraint is not secured properly, your
child could be seriously injured or killed in an
accident.
•
Do not install child restraints that require the
use of a top tether strap to seating positions
that do not have a top tether anchor.
•
Do not secure a child restraint in the centre
rear seating position using the ISOFIX lower
anchors. The child restraint will not be se-
cured properly.
•
Inspect the lower anchors by inserting your
fingers into the lower anchor area and feeling
to make sure there are no obstructions over
the ISOFIX anchors, such as seat belt web-
bing or seat cushion material. The child re-
straint will not be secured properly if the
ISOFIX anchors are obstructed.
•
Child restraint anchorages are designed to
withstand only those loads imposed by cor-
rectly fitted child restraints. Under no circum-
stance are they to be used for adult seat belts,
harnesses or for attaching other items or
equipment to the vehicle. Doing so could
1-22
Safety — seats, seat belts and supplemental restraint system
damage the child restraint anchorages. The
child restraint will not be properly installed
using the damaged anchorage, and a child
could be seriously injured or killed in a colli-
sion.
Installation on rear outboard seats
Front-facing child restraints:
Be sure to follow the child restraint manufacturer's
instructions for the proper use of your child restraint.
Follow these steps to install a front-facing child re-
straint on the second row outboard seats using
ISOFIX:
Steps 1, and 2
1. Position the child restraint on the seat
2. Remove the head restraint
rect child restraint fit.
Once removed, store the head restraint in a se-
cure place.
Be sure to reinstall the head restraint when-
ever the child restraint is removed (see "Head
restraints" earlier in this section).
3. Check that the back of the child restraint is
placed firmly against the vehicle seatback
4. Secure the child restraint anchor attachments to
the ISOFIX lower anchors
NPA1406
.
to obtain the cor-
NIC2807
Steps 3, and 4
.
.
NIC2808
Step 5