Panasonic KX-NCP500 Features Manual page 23

Location
0001 123-4567
0002 123-2468
0003 123-456
:
® 12.3 [10-3] DDI / DID Table—
*1
® [451] DID Number
® 12.3 [10-3] DDI / DID Table—
*2
® [452] DID Name
® 12.3 [10-3] DDI / DID Table—
*3
® 12.3 [10-3] DDI / DID Table—
*4
® [453] DID Destination
Note
Tenant number and VM trunk group number can also be assigned in the DID/DDI table. Tenant number is
used to determine the time mode (day/lunch/break/night) for the corresponding DID/DDI number. VM trunk
group number is used in Voice Mail DPT (Digital) Integration (® 1.24.3 Voice Mail DPT (Digital)
Integration).
Explanation:
If the DID/DDI number is "123-4567":
1.
Checks the number in the table.
® Matches the number in location 0001.
2.
Checks the time mode.
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to DID/DDI destination, extension 100.
Conditions
•
To use this feature, DID/DDI service must be assigned as the distribution method for a trunk port.
•
DID/DDI Number Modification
It is possible to modify a received DID/DDI number, which may be convenient when programming the DID/
DDI table. The modification method (removed number of digits/added number) can be programmed on a
trunk port basis.
[Modification Example]
Removed number of digits: 6
Added number: 10
Received DID/DDI number: 87654321
•
Inter-digit Time
When the Inter-digit time expires, the PBX stops receiving the DID/DDI number and starts to check the
DID/DDI table. (Refer to the [Programming Example of DID/DDI Table] above).
No. Name
*1 *2
John
White
Tom
Smith
A
company
: :
DDI / DID Number
DDI / DID Name
CLI Ring for DDI/DID—Day, Lunch, Break, Night
DDI / DID Destination—Day, Lunch, Break, Night
CLI
*3
Day Lunch
Enable Disable
Enable Disable
Enable Disable
: :
Modified DID/DDI number: 876543 21 = 1021
1) Remove the
first 6 digits.
1.1.1 Incoming Trunk Call Features
Destination
... Day Lunch
... 105 100
... 102 100
... 101 101
: : :
2) Add "10".
Feature Guide
*4
...
...
...
...
:
23