Automatic Route Selection (Ars) Features; Automatic Route Selection (Ars) - Panasonic KX-NCP500 Features Manual

1.10 Automatic Route Selection (ARS) Features

1.10.1 Automatic Route Selection (ARS)

Description
ARS automatically selects the carrier available at the time an outgoing trunk call is made according to
preprogrammed settings. The dialled number will be checked and modified to connect the appropriate carrier.
[Carrier Selection Procedure Flowchart]
The numbers in the flowchart correspond to the [Programming Procedures] on the following pages.
X
A trunk call is made.
Is the ARS mode (
Is the dialled number found in the
Leading Number Exception Table (
Is the dialled number found in the
Leading Number Table (
Checks the Routing Plan Table (
to determine which carrier to use.
Is the carrier (
appropriate time block (
Is there an available
trunk group (
Modifies the dialled number by
removing the digits (
following the modify commands (
Sends the modified number
to the trunk.
[Programming Procedures]
1.
ARS Mode
1
) enabled?
1
Yes
)?
2
No
)?
3
Yes
)
4
) found in the
6
)?
5
Yes
)?
11
Yes
) and
9
).
12
Assignment
No (Normal Trunk Access)
Sends the telephone
number to the user-
selected carrier.
Yes
No
No
No
No
Because all
trunks are busy?
Is normal
Yes
Trunk Access
allowed?
No
Sends a
Sends a
busy tone. reorder tone.
1.10.1 Automatic Route Selection (ARS)
Yes
(default)
Sends the
telephone number
by the Idle Line
Access.
Feature Guide 149