Wireless Menu - Lexmark MX310 User Manual

Understanding the printer menus
Use
Auto Configuration
On
Off
Set Hostname
View Address
View Router Address
Enable DHCPv6
On
Off

Wireless menu

Note: This menu is available only in printers connected to an Ethernet network and printers with a wireless
network adapter attached.
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > Wireless
•
Network/Ports > Network [x] > Network [x] Setup > Wireless
Use
Wi‑Fi Protected Setup (WPS)
Start Push Button Method
Start PIN Method
Enable/Disable WPS Auto‑detection
Enable
Disable
Network Mode
BSS Type
Infrastructure
Ad hoc
Compatibility
802.11b/g
802.11b/g/n
Choose Network
To
Specify whether or not the network adapter accepts the automatic
IPv6 address configuration entries provided by a router.
Note: On is the factory default setting.
Set the host name.
Note: These settings can be changed only from the Embedded
Web Server.
Enable DHCPv6 in the printer.
Note: On is the factory default setting.
To
Establish a wireless network connection and enable network
security.
Notes:
•
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given period of time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
Automatically detect the connection method that an access point
with WPS uses—Start Push Button Method or Start PIN Method.
Note: Disable is the factory default setting.
Specify the network mode.
Notes:
•
Infrastructure is the factory default setting. This lets the printer
access a network using an access point.
•
Ad hoc configures a wireless connection directly between the
printer and a computer.
Specify the wireless standard for the wireless network.
Note: The 802.11b/g/n is the factory default setting.
Select an available network for the printer to use.
108