Sending The Same Image To Multiple Destinations (Broadcast Transmission) - Sharp MX-7090N User Manual

SCANNER►TRANSMITTING AN IMAGE
SENDING THE SAME IMAGE TO MULTIPLE
DESTINATIONS (BROADCAST TRANSMISSION)
Send the same scanned image to multiple scan destinations in a single operation.
One operation allows you to send data to up to 500 destinations, including the reserved send jobs. (For example, if
broadcast transmission jobs with 450 destinations are already reserved, data can be broadcasted to up to 50
destinations.)
It is convenient to store destinations you frequently use for broadcast transmission as contacts or groups.
A maximum of 500 destinations can be stored in one contact.
► STORING ADDRESSES THROUGH DIRECT ENTRY (page 1-107)
► STORING ADDRESSES THROUGH GLOBAL ADDRESS SEARCH (page 1-108)
► USING A TRANSMISSION LOG TO RESEND (page 4-23)
► STORING GROUPS (page 1-111)
When the checkbox of "Settings (administrator)" -[System Settings] → [Image Send Settings] → [Common Settings] →
[Condition Settings] → [Address Book Default Selection] → [Apply Addresses of Sending Modes Only] is set to
default setting), the image is only sent to those destinations among the destinations that are set to [Set as Default used]
which are for the currently selected mode. If the checkmark is removed
other modes.
A transmission is performed, ignoring hyperlinks with Scan to FTP and Scan to Network Folder addresses.
To register destinations in a contact or group:
In the address book screen, tap [Add New] on the action panel, or tap the [Address Control] icon in the home screen. For
more information, see
THROUGH GLOBAL ADDRESS SEARCH (page
"STORING GROUPS (page
Originals
"STORING ADDRESSES THROUGH DIRECT ENTRY (page 1-107),"STORING ADDRESSES
1-108)",
1-111)".
Transmission
, the image can also be sent to destinations of
"USING A TRANSMISSION LOG TO RESEND (page
4-34
(factory
4-23)", or