Specifying The Send Size Of The Image - Sharp MX-7090N User Manual

SCANNER►TRANSMITTING AN IMAGE

SPECIFYING THE SEND SIZE OF THE IMAGE

Tap this key to specify the send size as a paper size. If the specified send size is larger than the scan size, the image will
be enlarged. If the specified send size is smaller than the scan size, the image will be reduced.
The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numeric values.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 4-8)
Tap the [Original] key.
2
Tap the [Send Size] key.
3
4
Address Book Address
Send Size
Auto
AB Inch
5½ x 8½
5½ x 8½R
8½ x 11
Others
Depending on the paper size specified for the "Scan Size", it may not be possible to select some sizes for the "Send
Size". You cannot tap size keys that are unavailable for the "Send Size".
Touch to input Address Background Adjustment
Slow Scan Mode
Scan Thin Paper Original
Blank Page Skip
Skip Blank Page in Original
Color Mode
Sharpness
Adjust Outline of Image
5½ x 11R 11 x 17
8½ x 13 8½ x 13 2 /
5
8½ x 14
Preview
Tap the desired send size key.
After the settings are completed, tap
CA
Start
4-46
.