Sharp MX-7090N User Manual page 212

COPIER►BASIC PROCEDURE FOR MAKING COPIES
4
Booklet
Select Output Binding Edge.
Off
Left Binding/
Tablet
Right Binding
Others Others
• The original will be scanned from the innermost side when folded.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Divide],
[Continue], or [Cancel] key.
[Divide]:
[Continue]:
[Cancel]:
To cancel the Saddle Stitch:
Tap the [Off] key.
Trimmer Setting
1
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray
Staple
Default Settings
Off
1 Staple 1 Staple
Trimmer
2 Staples 2 Staples
Setting
Others Others
2
Output
Trimmer Setting
Set Trimming Width.
Off
On
1 Staple
2 Staples
Others
To cancel the Trimmer Setting:
Tap the [Off] key.
N-Up
Put Multiple Pages in A Page
Paper Select
Change Paper Feed Tray
Original
Change Size/Direction.
Select Original Type. Erase
Erase Shadow Around
1-Sided
2-Sided
Booklet
Proof Copy
2-Sided
Tablet
Preview
Cover Setting
B/W
6 8
3 8½x14
Start
4 8½x11 8½x11
11x17
Divides the pages into sets that can be stapled and sorts them. You cannot use this function if the
cover settings are selected.
Continues sorting without stapling.
Cancels the staple sort setting.
Original Original
1 1
No. of copies
Change Size/Direction. Change Size/Direction.
N-Up
Output
Put Multiple Pages in A Page
Multi Shot
Margin Shift
Put Multiple Pages in A Page
Shift Position to Have Margin
Margin Shift
Erase
Shift Position to Have Margin
Erase Shadow Around
Erase
Offset Erase Shadow Around
Punch Fold
Proof Copy Proof Copy
Preview Preview
Saddle
Stitch
Original Original
B/W B/W
6 6 8 8
3 3 8½x14
8½x14 Start Start
4 4 11x17 11x17 4 8½x11 8½x11 11x17 11x17
Erase
No. of copies
1
Erase Shadow Around
Full Bleed Copy
(2.0 ῀ 20.0)
2 0
Proof Copy
mm
Preview
Original
B/W
6 8
3 8½x14
Start
4
11x17 8½x11 8½x11
Tap the [Left Binding/Tablet] or [Right
Binding] key to select an original and
configure the cover sheet setting.
After the settings are completed, tap
CA
Color
Start
When Saddle Stitch is selected, tap the
[Trimmer Setting] key.
CA CA
Colour Color
Start Start
Tap the [On] key, and specify the
trimming width.
Tap the numeric value display field of the trimming width,
and enter the allowable range using the numeric keys.
Otherwise, tap
.
CA
Color
Start
2-52
.
. After the settings are completed, tap