Sharp MX-7090N User Manual page 68

BEFORE USING THE MACHINE►LOADING PAPER
3
4
Changing the paper size
1
Paper guide
Hook
Transparent
sheet
Before changing the paper size of tray 2, raise the paper guide.
Indicator
line
Indicator
line
Tray 1 Tray 2
1-65
Lift the feed roller, and place paper
into the tray.
Load the paper with the print side facing up. The stack must
not be higher than the indicator line (maximum of 1200
sheets for tray 1, or maximum of 800 sheets for tray 2).
Lower the feed roller, and gently push
the paper tray into the machine.
Push the tray firmly all the way into the machine slowly.
Forcefully inserting the paper may cause skewed feeding
and paper misfeeds.
Remove the paper size guide.
With the base of the tray pressed all the way down, hold
down the hook at the bottom on the paper size guide and
pull the paper size guide up slightly.