COPIER►BASIC PROCEDURE FOR MAKING COPIES
OUTPUT
Configure the output settings for copies using Sort, Group, Offset, Separator Page, Staple, Punch, or Fold. Also specify
the output destination of copies.
You can tap the [Output] key in normal mode to configure settings for all output functions.
Settings for the staple and punch functions can also be configured from simple mode.
No. of copies
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray
Default Settings
Staple
Punch
Auto
Sort
Group
3
Others
8½x14
4
11x17
[Output] screen of normal mode
Output Tray
Specify the destination to output copies.
If a finisher (100-sheet stapling) or saddle stitch finisher (100-sheet stapling) is installed, you can select [Upper Tray],
[Middle Tray], or [Lower Tray].
CHANGING OUTPUT DESTINATION (page 2-43)
►
Offset
This function outputs copies while shifting them set by set. Setting the checkbox to
setting it to
disables the function.
Offset enabled
• This function is available when a finisher or saddle stitch finisher is installed and [Upper Tray] or [Lower Tray] is selected
as the output tray.
• The offset can be used with a custom size paper.
Selecting the staple function clears the Offset checkmark automatically.
Original
1
1
Change Size/Direction.
2-Sided Copy
N-Up
Put Multiple Pages in A Page
Margin Shift
Shift Position to Have Margin
Erase
Offset
Erase Shadow Around
Fold
Proof Copy
Separator
Page
Preview
CA
B/W
Color
6
8
Start
Start
8½x11 8½x11
Offset disabled
2-41
enables the offset function, and