Table of Contents
Advertisement
Calling up information
Setting a later end time
Setting rapid
heating
Suitable types of heating
Suitable temperatures
Setting rapid heating
Cancelling rapid heating
Notes
Press the ± button briefly. To view each item of
information, briefly press the ± button.
See the Time setting options section, Setting a later
end time".
With rapid heating, you can heat up the empty oven.
It is only suitable for certain types of heating.
3D hot air
Top/bottom heating
HydroBaking
Rapid heating will not work if the temperature is set to
less than 100 ºC.
If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid
heating is not necessary. It will not switch on.
Press the c button to activate rapid heating.
The c symbol appears in the status bar.
The temperature indicator bars start filling in.
Rapid heating ends when all the bars are filled.
You will hear a short signal. The c symbol goes out.
Place your dish in the cooking compartment.
Press the c button. The symbol goes out.
If you change the type of heating or open the oven,
rapid heating is cancelled.
If a duration has been set, this runs independently of
rapid heating and counts down immediately when
operation is started.
During rapid heating, you can call up the current
cooking compartment temperature with the ± button.
To ensure an even cooking result, do not place your
dish in the cooking compartment until rapid heating is
complete.
31
Advertisement
Table of Contents
