Table of Contents
Advertisement
Accessory holders
Attaching accessories
Before attaching the accessories for the first time,
you must insert the accessory holders.
Make sure that the attachment slits for the
accessories point outwards.
1. Place each accessory holder on the bracket.
2. Turn the accessory holder slightly outwards so that
the pin engages in the notch as far as it will go.
You can remove the accessory holder again at any
time. To do this, lift the accessory holder slightly, turn
it inwards and pull it upwards away from the bracket.
The accessories can be inserted into the accessory
holder at 4 different heights.
The ceramic on the lift up floor can be used as an
additional surface on which ovenware may be placed.
Tip the accessories slightly in the direction of the
attachment slits and attach them in the accessory
holder so that they engage securely.
Place the ovenware directly onto the ceramic on the
lift up floor.
21
Advertisement
Table of Contents
