Table of Contents
Advertisement
Setting areas
Rotation direction indicator
Temperature
indicator
Heating phases
The two settings areas show suggested values that
you can change.
The setting area which is currently active is light with
black writing. You can make changes here.
You can use the ¾ and ¿ navigation buttons, you can
switch from one settings area to the other.
The arrows ¾ and ¿ in the settings areas show you
which way you can go with the navigation buttons.
Once you start the oven, both settings areas are dark
with light writing.
The Ï indicator shows you the direction in which
you can move the rotary selector.
Ð = turn the rotary selector clockwise
Ñ = turn the rotary selector anti clockwise
If arrows are shown in both directions, you can turn
the rotary selector in both directions.
The five bars in the temperature indicator show the
heating phases and the residual heat in the cooking
compartment.
When the oven is started, five bars appear in the
status bar. The set temperature has been reached
when the last bar is filled.
Top/bottom heating 180ºC
The bars do not appear when settings are made for
grilling and cleaning.
While the oven is heating up, you can call up the
current heating temperature using the i button.
Due to thermal inertia, the temperature displayed
may differ slightly from the actual temperature in the
cooking compartment.
15
Advertisement
Table of Contents
