Avaya T3 (IP) Comfort User Manual page 33

Making calls without the handset
Listening to the opposite party over the loudspeaker (monitoring)
While telephoning with the handset off-hook:
Press the "Monitoring/Handsfree" function key (LED goes out). You can then
hear the caller through the built-in loudspeaker.
Note
• The desired loudspeaker volume can be set using the keys "+ und "-.
• You can switch off the loudspeaker while monitoring by pressing the "Handsfree/
monitoring" function key twice (LED goes out).
Making a call with the handset on-hook (handsfree)
... Enter the call number.
Press the "Handsfree/monitoring" function key (LED flashes).
When the desired party answers, you can hear them over the loudspeaker and also
talk to them with the receiver on hook.
Note
• The LED next to the function key flashes whenever you switch to handsfree.
• If you want to make a handsfree call, you can also select the number from the call
list or the redial list.
• If you have switched Direct dial (
Handsfree" key and then enter the call number.
Continuing a call in handsfree mode when the handset is off-hook
During a call:
Press the "Handsfree/monitoring" function key twice (LED flashes).
Replace the handset.
You can hear the other party over the loudspeaker and you can also talk to them with
the receiver on-hook.
Handsfree - continuing the call using the receiver
During a call in handsfree mode:
Lift the receiver (LED goes out).
→
p. 86) on, you must first press the "Monitoring/
Making calls as usual
i
i
33