TP-Link TL-WA801ND User Manual page 8

Chapter 1
The following parts (view from left to right) are located on the rear panel.
Ports or Buttons
ON/OFF
Power
ETHERNET
WPS
RESET
Antennas
To power on or off the access point.
For connecting the access point to a power socket via the provided
power adapter.
The 10/100Mbps LAN port connects to a network device, such as a
switch or a router.
If your client devices, such as wireless adapters, support Wi-Fi
Protected Setup, then you can press this button to quickly establish
a connection between the access point and the client devices,
which automatically configures wireless security for your wireless
network.
Press and hold this button until all the LEDs turn on momentarily.
Used for wireless operation and data transmitting. Upright them for
the best Wi-Fi performance.
Get to Know About Your Access Point
Description
5