Bypassing i3822V electronics
To isolate issues that are unrelated to the i3822V, you can rewire to remove the
i3822V from service, completely bypassing all electronics on the board, while
troubleshooting other problems in the home wiring.
To remove the i3822V from service:
1. Remove the connector from both DSL line 1 (grey) and DSL Line 2 (black) ports.
2. Remove the connector from both phone ports (grey and black) on the IDC.
3. Remove the connector from the Line 1 (green) port, and insert it into the grey
4. Remove the connector from the Line 2 (yellow) port, and insert it into the black
56
Chapter 6
TELCO ACCESS
phone port on the IDC.
phone port on the IDC.
Troubleshooting
TO TEST VOICE SERVICE PLUG IN WORKING PHONE
FROM CO
ETHERNET
DSL LINE 1
DSL LINE 2
LINE 1
CO LINE 1
CO LINE 2
LINE 2
POWER
COAX