Replacing And Removing The I38Hg - Pace i3822V Installation Manual

Indicators
WIRELESS
LINE 1 and LINE 2
NID
BROADBAND
SERVICE

Replacing and removing the i38HG

The i38HG (inside unit) is a home networking hub that provides an 802.11b/g Wi-Fi
access point and Ethernet switch functions for connecting personal computers and
other in-home networked devices to the service provider's network. The i3822V
(outside unit) is the gateway that acts as the network interface device. All wireless
configuration data is stored on the i3822V.
When you replace your i38HG, you do not need to reconfigure any settings on the new
device. All your configuration information is automatically configured to the new i38HG
when the device is initially installed and begins communicating with the i3822V. This
includes the network name and wireless key, meaning that you do not need to
reconfigure your devices during an i38HG replacement.
After replacing the i38HG, the information on the label of the i38HG will not be valid.
You can change your network name and wireless key by going to the user interface.
46 Chapter 5
Description
• Solid green. A device is associated with a specific access
point.
• Flashing green. There is inbound activity. The flickering of
the light is synchronized to the actual data traffic.
• Solid green. The associated voice line has been registered
with a SIP proxy server.
• Flashing green. A telephone is off-hook on the associated
voice line.
Solid green. The link between the i38HG and i3822V is
healthy.
This indicator shows the i3822V VDSL status.
• Solid green. There is a successful broadband connection.
• Flashing green. The i3822 is attempting to establish a
broadband connection.
• Flashing green and red. The broadband connection has
failed to establish for three consecutive minutes.
• Red. There is no DSL signal.
• Solid green. The i3822V has a WAN IP address from
DHCP and the broadband connection is up.
• Flashing green. The i3822V is attempting to be
authenticated.
• Red. The i38HG has failed to receive an IP address
assignment from the network.
Installing the i38HG (Inside Unit)