Table of Contents
Advertisement
Installing the i3822V
(Outside Unit)
Use the information in this chapter to install the i3822V component on the outside of
the subscriber's home.
Installation overview
To install the i3822V component, you will do the following:
•
•
•
•
•
•
WARNING:
wire.
Mounting the i3822V
The i3822V is housed in a protective casing that can be mounted on any flat surface
(wood, brick, or stone) of an outside wall. To mount the i3822V:
1. Locate a wood stud in an exterior wall where you want to mount the i3822V.
2. Use the 5/32" tamper-proof hex screwdriver to loosen the screw on the cover.
12
Chapter 2
"Mounting the i3822V" on page 12
"Connecting network cables" on page 14
"Connecting power supply wires" on page 17
"Connecting the coaxial cable" on page 19
"Securing the i3822V" on page 22
To reduce the risk of fire, use 24 AWG or larger telecommunication line
Installing the i3822V (Outside Unit)
2
Advertisement
Table of Contents
