Connecting The Coaxial Cable - Pace i3822V Installation Manual

5. Press the tab downward to lock the wires into the connector.
TO TEST VOICE SERVICE PLUG IN WORKING PHONE
FROM CO
NE 1 DSL LINE 2 LINE 1 LINE 2
COAX
CO LINE 1
O LINE 2
6. Tug gently at the inserted wires to make sure that they are securely seated.

Connecting the coaxial cable

To connect the coaxial cable to the i3822V:
1. Cut an opening on the right grommet entry for the coaxial cable to fit through.
Note: Use an appropriate tool to cut or punch through the grommet. Make the cut
just big enough for the cable to fit through. The grommet prevents insects from
entering the inside of the unit. Seal any extra gaps on the cuts.
2. Insert the cable through the opening on the grommet entry.
Chapter 2 Installing the i3822V (Outside Unit)
POWER
19