Checking Dsl Links - Pace i3822V Installation Manual

Checking DSL links

After installing the i3822V and iPSU, verify that the DSL links are functioning and that
Internet is accessible. The following figure shows a workflow diagram for testing and
troubleshooting purposes.
After the i3822v
installation
1. Check iNID wiring connections.
2. Check iNID LEDs.
LEDs light green?
Yes
1. Connect to the Telco Access
Port.
2. Access GUI.
DSL connected?
Yes
Verify DSL signals–bandwidth,
SNR, and so forth.
Signal
requirements
met?
Yes
Go to the Broadband page and
verify that the Internet is
connected.
END
Chapter 6 Troubleshooting
No
No
Check for provisioning
issues.
Provisioning
issues clear?
No
No
Resolve issues.
Yes
49