Table of Contents
Advertisement
HORIZONTAL LEFT / LEFT VENT
AIRFL
OW
PARTS NEEDED:
FROM PARTS BAG(PROVIDED WITH UNIT)
INTAKE COUPLING
FROM CONVERSION KIT RXGY-CK
RXGY-CK
1/2" VINYL
.559" CONDENSATE
CAP (YELLOW)
TRAP DRAIN PLUG
TOOLS/MATERIALS NEEDED:
ERIALS NEEDED:
PLIERS
PLIERS
DRILL
1/4" HEX HEAD DRIVER
1/4" HEX HEAD DRIVER
1/8" DRILL BIT
NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME
SION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE
NOTE: STEPS 1- 4 SHOWN WITH FURNACE IN "AS SHIPPED CONDITION"
WN WITH FURNACE IN "AS SHIPPED CONDITION"
1
1
HOSE "D"
(RETAIN)
(RETAIN)
VENT HOSE
(DISCARD)
1 - REMOVE CONDENSATE TRAP AND HOSES.
(RETAIN HOSE D FOR LATER USE.)
(NOTE: TO REMOVE TRAP, REMOVE (2) SCREWS AND
PULL STRAIGHT OUT).
W/NUT
1/4" BLACK
VENT TUBING
TUBING CUTTER
2
2a - REMOVE .403" DRAIN PLUG
2b - INSTALL INTAKE COUPLING
2c - INSTALL 1/2" VINYL CAP (YE
2d - REMOVE RECTANGLE FLUS
PARTS NEEDED FOR THIS CONVERSION REQUIRE ITEMS
!
FROM THE PARTS BAG AND CONVERSION KIT RXGY-CK.
YOU MUST HAVE THE PARTS OUTLINED BELOW BEFORE
PROCEEDING.
CONDENSATE
TRAP GASKET
INTAKE
COUPLING
2d
2a
G FROM FLUE ELBOW - DISCARD.
G FROM FLUE ELBOW DISCARD
G IN TOP PLATE.
ELLOW) IN INDUCER COUPLING AS
SH MOUNT PLUG FROM JACKET SI
(X3)
#8 X 1/2"
1/2" DRAIN
SCREW
HOSE E
INSTALL
2b
2c
1/
/2" VINYL
CAP
(IN
NSTALL)
S SHOWN.
DE-DISCARD.
ST-A1194-35-01
39
Hide quick links:
Advertisement
Table of Contents
