Omron BU150R Instruction Manual page 25

3.
For EIA standard-compliant installation, use the 8 included EIA rack fixing nuts (M5)
and 8 EIA/JIS rack fixing screws (M5) to securely fasten the front (the side
displaying "L" or "R") and the back of the support angles to the server rack. (③)
The screw holes are located at the top and bottom for both front and rear.
For JIS standards, use a total of 6 included screws to fix the rack; 1 JIS rack fixing
flat-head screw (M5) at a front position of the each of right and left support angles,
2 EIA/JIS rack fixing screws (M5) at 2 rear positions. (③) The screw hole position
for the front is at the second screw hole from the top, the rear is at the second
screw hole from the bottom.
BU150R
③
Adjust the length to
suit the server rack and
tighten securely
Server rack
2 Installation and connection
Support angle
②
②
2-1 Installation
③
Rack fixing screws
25
2