About Leds - Avaya Agent 16CC User Manual

Name
Mute
16 Call/Line
Appearance
Buttons or Feature
Buttons

About LEDs

Each call/line appearance button and feature button has two LEDs, one green and one
red, to indicate the status of the call/line appearance or feature. The status is identified by
whether the LED is on, off, or blinking as described in the following tables.
Table 1. Call/Line Appearance Button LEDs
LED
Steady green
Slow blinking green
Fast blinking green
Very fast blinking
green
Steady red
Off
Table 2. Feature Button LEDs
LED
Steady green
Blinking green
Blinking red
Off
Note:
Depending on your call processing system, the feature button LEDs for some features
may operate differently.
Introduction to the Avaya Agent Deskphone 16CC
Description
Press the Mute button to mute a call in progress. To take a call off
mute, press Mute again.
There are 16 buttons that can be programmed as either call/line
appearance buttons or feature buttons. Press a call/line
appearance button to make or answer a call or resume a call on
hold. Press a labeled feature button to enable or disable that
feature. The feature buttons provide access to the Avaya call
center system features that have been administered for your
extension. The green LED next to each feature button indicates if
the feature is currently on or off. If the green light is on, the feature
is on. The feature buttons provide the same features that are
available in the features menu. For more information about the
features menu, see Features
Description
Call/line appearance is active.
Call/line appearance is ringing.
Call/line appearance is on hold.
Conference or Transfer is pending.
Call/line appearance is selected and will be used when you go off-
hook. It remains steady red while you use the call/line appearance.
Call/line appearance is available.
Description
Feature is active.
Feature is pending (request is being processed and not
immediately available).
Feature is shown on the phone display.
Feature is not active.
Menu.
Issue 1 January 2008 11