Fast User Switching Function - Panasonic CF-T2 Series Reference Manual

Dealing with Problems (Advanced)
SD Card Setup (SD memory card security function)
Cannot log on with the SD memory
card

Fast User Switching Function

Windows XP
Some applications may not work
properly
Others
No response
Windows logon user name and password are not set in the SD memory card
correctly.
Enter the Windows user name and password without using the SD memory
card. After logging on, reset the SD memory card (
[Control Panel] to create a user with the user name and password set on the
SD memory card.
For Hong Kong
If you change the setting for Language for non-Unicode programs after the
check mark has been added in [Use when logging on to Windows] under [SD
Card Settings] - [Setting for this SD card], remove the check mark from [Use
when logging on to Windows] under [SD Card Settings] - [Setting for this SD
card], and set the user name and password again. (
When switching to a different user with the Fast User Switching function, the
following problems may occur.
• Some applications may not work properly.
• Key combination with Fn may not work.
• It may not be possible to set the settings of the display.
• The wireless LAN cannot be used.
In this case, log off all users, and try the operation once more. If the problem
persists, restart the computer.
Press Ctrl + Shift + Esc to open Task Manager and close the software
application which is not responding.
After shutting down by sliding the power switch for more than four seconds,
slide the power switch to power on and open the application again. If the
program no longer works normally, delete the program using the following
menu. Then reinstall the program.
Windows XP
[start] - [Control Panel] - [Add or Remove Programs]
Windows 2000
[Start] - [Settings] - [Control Panel] - [Add/Remove Programs]
111
page 56), or use the
page 56)