SD Memory Card/MultiMedia Card
Setting Up an SD Card after the SD Card Setup Program Has Been Used
After you run the SD Card Setup program once, the setup screen that appears the next time
you run it will be different. This section describes how to set up an SD card in such cases.
1
Turn on the computer.
2
Insert the SD memory card in the SD memory card slot.
Windows XP
When [Removable disk] appears, select [Take no action], then select [OK].
3
Start the SD card setup program.
Windows XP
Select [start] - [All Programs] - [Panasonic] - [SD Card Setup].
Windows 2000
Select [Start] - [Programs] - [Panasonic] - [SD Card Setup].
4
Change the settings as necessary.
62