Using An Sd Memory Card - Panasonic CF-T2 Series Reference Manual

SD Memory Card/MultiMedia Card

Using an SD Memory Card

An SD memory card that has been initialized (SD Card Setup) can be used as described
below.
If the card is set for [Use when starting computer]
When the screen on the left appears...
If [Leave set] was selected in step
Insert the SD memory card.
If an SD memory card is already inserted, the password input screen does not appear.
If [Set and eject] was selected in step
Insert the SD memory card, then eject it.
NOTE
Without using the SD memory card, you can also start your computer by entering the
Supervisor Password or User Password.
If the card is set for [Use when logging on to Windows]
If you are prompted to enter your password during Windows logon...
If [Leave set] was selected in step
Insert the SD memory card.
If an SD memory card is already inserted, reinsert it. However, if it is already inserted
when starting the computer, the Windows logon screen does not appear when the
computer is started.
If [Set and eject] was selected in step
Insert the SD memory card, then eject it.
If you are prompted to enter your password when you try to use the computer in standby or
hibernation mode, or while the screensaver is active...
• If [Leave set] was selected in step
Insert the SD memory card.
If an SD memory card is already inserted, reinsert it.
• If [Set and eject] was selected in step
Insert the SD memory card, then eject it.
5
for [Initialization (SD Card Setup)]
5
for [Initialization (SD Card Setup)]
5
for [Initialization (SD Card Setup)]
5
for [Initialization (SD Card Setup)]
5
for [Initialization (SD Card Setup)]
5
for [Initialization (SD Card Setup)]
60