Panasonic CF-T2 Series Reference Manual page 24

Standby/Hibernation Functions
Precautions
Before entering the standby or hibernation mode
Be sure to save all data.
When a file in an external device such as a CD drive, external hard disk, or ATA card is
opened, close the file.
Even when a password has been set in the Setup Utility, [Enter Password] does not
appear when the computer resumes from the standby or hibernation mode. If you want to
use the security function when using the standby or hibernation mode, use the Windows
password as follows:
Windows XP
1
Select the account to change in [start] - [Control Panel] - [User Accounts].
2
Set the password.
3
Add the check mark for [Prompt for password when computer resumes from
standby] in [start] - [Control Panel] - [Performance and Maintenance] - [Power
Options] - [Advanced].
Windows 2000
1
Set the password in [Start] - [Settings] - [Control Panel] - [Users and
Passwords].
2
Add the check mark for [Prompt for password when computer goes off standby]
in [Start] - [Settings] - [Control Panel] - [Power Options] - [Advanced].
Do not enter either the standby or hibernation mode under the following conditions.
You may corrupt your data or file, the standby or hibernation function may not work, or the
computer (or peripherals) may fail to work properly.
• While the floppy disk drive is being accessed, or hard disk drive indicator
memory card indicator
• When playing/recording audio files and displaying images (such as MPEG files).
• When using communications software or the network function.
• When using PC Cards.
(If these cards fail to work properly, restart the computer.)
When entering the standby or hibernation mode
Standby mode: until the power indicator blinks green
Hibernation mode: until the power indicator goes off
is on.
24
or SD