Panasonic CF-T2 Series Reference Manual page 78

Modem
Ring Resume Function
Enabling the Ring Resume Function
Windows XP
When creating a new connection via the New Connection Wizard, the following error
message may be displayed: [System error 1717 has occurred. The interface is
unknown.] This will not affect the operation of the computer. Disregard this error
message.
With this function, if the telephone that is connected to the modem rings in the standby mode,
the power of the computer automatically switches ON.
This function is convenient when using automatic information receiving applications such as
a FAX application.
When using this function, it is necessary to run a software application able to maintain the
condition to receive telephone calls and to return the computer to the original condition after
a call. For further details, refer to the operating instructions provided with software
applications.
Windows XP
1
Select [Device Manager] in [start] - [Control Panel] - [Performance and
Maintenance] - [System] - [Hardware] and then select the modem you are
using from [Modems].
2
Select [Power Management], add the check mark for [Allow this device to bring
the computer out of standby], then select [OK].
Windows 2000
1
Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] -
[Hardware] and then select the modem you are using from [Modems].
2
Select [Power Management], add the check mark for [Allow this device to bring
the computer out of standby], then select [OK].
CAUTION
When using this function, it is recommended that the AC adaptor be connected to the
computer.
78