Panasonic CF-T2 Series Reference Manual page 30

Security Measures
Setting the Supervisor Password
(enabling, changing, disabling)
NOTE
When [Password on boot] in the Setup Utility is set to [Disable], the password is not
necessary when the computer is started up, but the password becomes necessary
when the Setup Utility is started up. This alternative makes it possible to prevent the
contents of the Setup Utility from being changed.
1
Run the Setup Utility. (
2
Using either
3
Using either
Enter
.
4
Only when the Supervisor Password has been set:
Enter your password at [Enter Current Password] and press
5
Enter your password at [Enter New Password] and press
To disable the Supervisor Password
Press only Enter .
6
Re-enter your password at [Confirm New Password] and press
Enter
.
To disable the Supervisor Password
Press only Enter .
7
At [Setup Notice], press
8
F10
Press and select [Yes], then press
page 88)
or , select [Security].
or , select [Set Supervisor Password] and press
Enter
.
30
Enter
Enter
Enter
.
.
.