Panasonic CF-T2 Series Reference Manual page 70

External Display
About [Intel(R) Extreme Graphics]
When the external display is used alone, set the number of colors, resolution, or
refresh rate to suit the external display. These settings are separate from when the
internal LCD is used alone or with an external display simultaneously.
When the computer is set to [Intel(R) Dual Display Clone] mode, MPEG and other
video files may not be played back smoothly, depending on the size of the video
playback screen.
Also, carefully read the operating instructions of the external display.
When connecting a monitor that does not conform to the Plug & Play standards.
Either select the correct external display driver using in the following menu. Or use
the driver disk that was supplied with your monitor.
Windows XP
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] -
[Advanced] - [Monitor] - [Properties] - [Driver] - [Update Driver]
Windows 2000
[Start] - [Settings] - [Control Panel] - [Display] - [Settings] - [Advanced] - [Monitor] -
[Properties] - [Driver] - [Update Driver]
If a picture is not displayed properly, lower the level of [Hardware acceleration] in the
following menu.
Windows XP
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] -
[Advanced] - [Troubleshoot]
Windows 2000
[Start] - [Settings] - [Control Panel] - [Display] - [Settings] - [Advanced] -
[Troubleshooting]
Changes to the Extended Desktop and selection of the display destination can be done in
[Intel(R) Extreme Graphics].
70