Panasonic CF-T2 Series Reference Manual page 68

RAM Module
3
Insert/Remove RAM module.
Inserting the RAM module
1
Match the notch (E) in the RAM module (C) with the protrusion at the edge of
the slot (D), and insert the module diagonally.
Insert it firmly until the gold colored terminals are no longer visible.
2
Press the module down until the right and left hooks lock into place.
Removing the RAM module
1
Gently open the left and right hooks (F).
2
Gently remove the RAM module from the slot.
4
Put the cover back in place.
1
Insert the cover diagonally, then fit it in place.
2
Fasten the screw.
NOTE
Whether the RAM module is properly recognized or not can be confirmed in
[Information] menu of the Setup Utility (
If the RAM module is not recognized, power off the computer and insert it again.
page 89).
68