Fast User Switching Function - Panasonic CF-74 Series Reference Manual

Troubleshooting (Advanced)
Smart Card
Cannot use a Smart Card.

Fast User Switching Function

Some applications do not work prop-
erly.
Others
No response.
A motion image file cannot be played
®
using Windows Media Player and the
message [Codec required] appears.
Insert the Smart Card correctly.
Set [Smart Card] to [Enable] in the [Advanced] menu of the Setup Utility
( page 62).
To use a Smart Card, you need a special software and driver.
When switching to a different user with the Fast User Switching function, the
following problems may occur.
• Some applications may not work properly.
• Key combination with Fn may not work.
• The display settings may not be possible.
• A serial mouse may not work.
• The B's CLiP icon does not appear on the notification area and disc writing is
not possible.
• <Only for model with wireless LAN>
Wireless LAN cannot be used.
• <Only for model with Bluetooth>
Bluetooth cannot be used.
In these cases, log off all users without using Fast User Switching function and
perform the operation once more. If the problem persists, restart the computer.
Press Ctrl+Shift+Esc to open Task Manager and close the software appli-
cation.
An input screen (e.g., password input screen at startup) may be hidden behind
another window. Use Alt+Tab to check.
Shut down by pressing and holding the power button for four seconds or longer,
and turn on the computer and open the application again. If it no longer works
normally, delete and reinstall it.
Click [start] - [Control Panel] - [Add or Remove Programs].
Some motion image files require a Codec that is not installed as standard. In
this case, connect to the Internet and try playback of the file again. The Codec
may automatically be downloaded so you may be able to play it.
77